Surface Preparation
Surface to be painted must be clean and free of dirt, dust, grease, and flaking paint. Remove loose material by scraping and sanding. Dull glossy areas by sanding. Apply two coats of CS 584 ULTRATRIM Matt Wood & Metal Enamel after priming as outlined below. New Wood: Spot prime all caulked nailholes and patches with CS 570 THE PERFECT PRIMER Alkyd Multi Primer&Sealer. Allow to dry, then apply a full coat of Alkyd Undercoat. Sand to a smooth surface.
New Plaster, Gypsum Board: Prime with CS 192 WALL PLUS Micronized Stabilizing Eco Primer or CS 570 THE PERFECT PRIMER Alkyd Multi-primer. Ferrous Metal: Remove rust and loose material before priming exposed metal with CS 568 THE PERFECT PRIMER Rust Primer.
Previously Painted Surfaces: Prime with CS 023 THE PERFECT PRIMER Acrylic Eco Primer or CS 570 THE PERFECT PRIMER Alkyd Multi-primer.
For Application By
Stir thoroughly before use. Apply by brush, roller or spray. Use short nap roller on smooth surfaces. Thin 5% with clean water. Do not apply at temperatures below 10OC. Drying times are longer under cool/moist conditions.
Clean Up
Clean equipment in warm, soapy water after painting.
Precautions Health
•If medical advice is needed, have product container or label at hand. •Keep out of reach of children. •Keep container tightly closed. •Do not get in eyes, on skin, or on clothing. •Avoid release to the environment. •Call a POISON CENTER or a doctor if you feel unwell. •Dispose of contents and container to appropriate waste site or recycled in accordance with local and national regulation. •Safety data sheet available on request. •Contains: mixture of: 5-chloro-2-methyl-4-isothiazolin-3 -one and 2-methyl-2H-isothiazol-3-one (3:1), •1,2-Benzisothiazol-3 (2H) -one, 2,4,7,9-Tetramethyldec-5-yne-4,7-diol. May produce an allergic reaction.
POISON CENTER TEL.: +302107793777
