Surface Preparation
Surface must be clean, dry and free of dirt, oil or grease. Old, flaky or poorly adhesive varnish must be sanded down. On new wood apply one coat CS 090 AQUA GUARD Wood Preservative. Finish with two coats CS 093/094 AQUA GUARD Wood Acrylic Varnish which is recommended to be applied colored for maximum protection.
For Application By
Stir thoroughly before and during use. Apply two coats CS 093 or CS 094 Aqua Guard Wood Acrylic Varnish without thinning by brush, roller or spray. Sand lightly between coats. The actual color of the varnish can vary depending on number of coats, natural color of wood, texture and grain porosity. Do not apply when temperature is below 10°C or against the hot sun. Drying times are longer in cool/moist conditions.
Notice
Uneven gloss might show on film if applied when high humidity is present, which disappears in time.
Clean Up
Clean equipment in warm, soapy water.
Precautions Health
If medical advice is needed, have product container or label at hand• Keep out of reach of children • Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1). • May produce an allergic reaction.• Do not get in eyes, on skin, or on clothing •Dispose of contents and container to appropriate waste site or recycled in accordance with local and national regulation. • Keep container tightly closed.•Avoid release to the environment • Containing a biocidal product with fungicidal properties. • Active ingredients:butylcarbamate-3-iodo-2-propynyl (55406-53-6) to protect the coating (film). • Do not empty into drains. • The residual water from cleaning of the working equipment must not get into the ground or into surface waters.• Call a POISON CENTER, doctor if you feel unwell.• Safety data sheet available on request.
TEL. POISON CENTER GR: 210 7793777