Surface Preparation
Surface to be painted must be thoroughly clean, dry and free of dust, dirt, grease, loose material, flaking paint, concrete salts and mildew. Remove loose material by scraping and sanding. Note: If mildew is present, remove with a commercial mildew wash, following manufacture’s directions and cautions. Apply one coat. Fill nail holes, cracks and areas needing repair, then spot prime these areas.
New Wood: Spot prime all caulked nailholes and patches with CS 023 The Perfect Primer, all-purpose eco primer. Allow to dry, then apply a full coat CS 023 The Perfect Primer, all-purpose eco primer. Sand to a smooth surface.
New Gypsum Board: CS 023 The Perfect Primer, all-purpose eco primer will not raise the nap of the paper.
New Walls, Plaster and Concrete: Apply once these surfaces are dry and cured.
Brick, Masonry: Ensure loose and crumbling material is removed before priming.
Previously Painted Surfaces: Ensure surface is clean and sound.
Galvanized Metal, Stainless Steel and Aluminium: Degrease with white spirits or suitable solvent or other properly methods. Apply 1 coat CS 023 THE PERFECT PRIMER all-purpose eco primer
Glass, Rigid PVC, Ceramic Tile and other hard non-porous surfaces: Clean thoroughly with detergent and water. Apply 1 coat CS 023 THE PERFECT PRIMER all-purpose eco primer