THE PERFECT PRIMER Stain Killer Waterborne Primer & Sealer
CS 341

Spreading Rate
12-15 m2/L

Thinning
5% water

For Application By
Brush, Roller, Spray

Dry Time at 20°C
30 min to touch

Spreading Rate
12-15 m2/L

Thinning
5% water

For Application By
Brush, Roller, Spray

Dry Time at 20°C
30 min to touch

THE PERFECT PRIMER Stain Killer Waterborne Primer & Sealer
CS 341

A fast drying 100% acrylic sealer and stain suppressor with normal drying time of 30 minutes, which allows quick recoat. Specially formulated to prime and seal stained surfaces such as smoke, water stains, lipstick, crayon, nicotine and others. Good stained blocking on tropical wood on interior use. Use on walls, plaster, gypsum, board, wood. Breathable film, outstanding adhesion and sealing.

Colors:  White

Toxicity: Formulated without lead or mercury

Διαβάθμιση Γυαλάδας: Satin

Packaging: 0.75 lt, 2.5 lt 

Επιλέξτε απόχρωση

A fast drying 100% acrylic sealer and stain suppressor with normal drying time of 30 minutes, which allows quick recoat. Specially formulated to prime and seal stained surfaces such as smoke, water stains, lipstick, crayon, nicotine and others. Good stained blocking on tropical wood on interior use. Use on walls, plaster, gypsum, board, wood. Breathable film, outstanding adhesion and sealing.

Colors:  White

Toxicity: Formulated without lead or mercury

Διαβάθμιση Γυαλάδας: Satin

Packaging: 0.75 lt, 2.5 lt 

Performance Features

Categories: ,

Surface Preparation

Surface must be free of all loose material such as flaking and peeling paint, dust, dirt and heavy chalk. The surface must be clean from grease, form oils, and mildew removed. Remove loose material by scraping and sanding. Sand glossy surfaces to a dull finish.
NOTE: If mildew is present, remove with a commercial mildew wash following manufacturer’s directions and cautions. Fill nail holes, cracks and areas needing repair, then spot prime these areas. After drying apply one or two coats of CS 341 THE PERFECT PRIMER Stain Killer Primer & Sealer.
New surface: Apply one coat of CS 341 THE PERFECT PRIMER Stain Killer Primer & Sealer.
Previously Painted Surfaces: Spot prime any repairs, then apply an overall – coat of CS 341 THE PERFECT PRIMER Stain Killer Primer & Sealer.
Wood: Spot prime any repairs, then apply an overall coat of CS 341 THE PERFECT PRIMER Stain Killer Primer & Sealer.
Stained Surfaces: Two coats of CS 341 THE PERFECT PRIMER Stain Killer Primer & Sealer are recommended for tough stains.

For Application By

Stir paint thoroughly before use. Apply by roller, brush or airless spray. Thinning 5% with water. Do not apply at temperatures below 10° C.

Clean Up

Clean equipment in warm, soapy water.

Precautions Health

If medical advice is needed, have product container or label at hand• Keep out of reach of children• Do not get in eyes, on skin, or on clothing• Avoid release to the environment•Dispose of contents and container to appropriate waste site or recycled in accordance with local and national regulation•Keep container tightly closed.• Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1).• May produce an allergic reaction.•Call a POISON CENTER, doctor if you feel unwell.• Safety data sheet available on request.

TEL. POISON CENTER GR: 210 7793777

Related products

+
 Quick View

FACADES AND STONE SEALER Based on Silanes – CS 099-00

+
 Quick View

THE PERFECT PRIMER All-purpose eco primer Waterborne 100% Acrylic – CS 023

+
 Quick View

Aqua Guard Polyurethane Gloss
CS 422

+
 Quick View

Aqua Guard Polyurethane Satin
CS 423

+
 Quick View

Acrylic Polyurethane Wood & Metal Enamel – Satin CS 587