Surface Preparation
Surface must be clean, dry and free of dirt, oil or grease. Completely remove old or poorly adhering varnish to expose new wood. On tropical wood wash down with nitro thinner to remove resins that may lengthen dry times. It mildew is evident it must be removed by scrubbing with a commercial mildew wash, following manufacturer’s direction and cautions.
NOTE: For further protection if necessary against fungi and wood rotting microorganisms use one coat CS 090 AQUA GUARD Wood Preservative. Afterwards apply one or two coats CS 089 AQUA GUARD Gel Wood Varnish & Deck Stain
For Application By
Stir thoroughly before and during use. Apply one or two coats CS 089 AQUA GUARD Gel Wood Varnish & Deck Stain, without thinning by brush, roller or spray. The actual colour of the varnish can vary depending on number of coats, natural colour of wood, texture and grain porosity. Do not apply when temperature is below 10°C or against the hot sun. Drying times are longer in cool/moist conditions.
Clean Up
Clean equipment in warm, soapy water
Precautions Health
If medical advice is needed, have product container or label at hand• Keep out of reach of children • Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1). • May produce an allergic reaction.• Do not get in eyes, on skin, or on clothing •Dispose of contents and container to appropriate waste site or recycled in accordance with local and national regulation. • Keep container tightly closed.•Avoid release to the environment • Containing a biocidal product with fungicidal properties. • Active ingredients:butylcarbamate-3-iodo-2-propynyl (55406-53-6) to protect the coating (film). • Do not empty into drains. • The residual water from cleaning of the working equipment must not get into the ground or into surface waters.• Call a POISON CENTER, doctor if you feel unwell.• Safety data sheet available on request.
TEL. POISON CENTER GR: 210 7793777
