CONCRETE STAIN & SEALER Waterbased Polyurethane Acrylic – CS 098

CONCRETE STAIN & SEALER Waterbased Polyurethane Acrylic – CS 098


A water based odorless – non yellowing – acrylic polyurethane concrete stain. It allows the beauty of natural stones to show through while allowing long lasting protection. It features deep penetration, not film forming, will not peel, easy application, quick drying. Ideal for porous stones, mosaic, and artificial buildings materials such as brick, roof, tiles and concrete. Suitable for light use on pre-cast concrete basement, factory and warehouse floors.

Colors:  Clear. Do not tint.    

Toxicity: Formulated without lead or mercury.

Gloss Level: Satin

Packaging: 0.75lt, 2.25 lt 


A water based odorless – non yellowing – acrylic polyurethane concrete stain. It allows the beauty of natural stones to show through while allowing long lasting protection. It features deep penetration, not film forming, will not peel, easy application, quick drying. Ideal for porous stones, mosaic, and artificial buildings materials such as brick, roof, tiles and concrete. Suitable for light use on pre-cast concrete basement, factory and warehouse floors.

Colors:  Clear. Do not tint.    

Toxicity: Formulated without lead or mercury.

Gloss Level: Satin

Packaging: 0.75lt, 2.25 lt 

Performance Features

Surface Preparation

The surface must be dry and clean with all traces of grease oil, wax, sealers and salts. Smooth towelled surfaces or non porous concrete, must be etched before applying CS 098 CONCRETE STAIN & SEALER, Waterbased Polyurethane Acrylic. Use a 10% muriatic acid solution to etch the concrete, then rinse thoroughly with water and allow to dry completely, at last 24 hours, before applying stain.

For Application By

Stir thoroughly before and during use. Apply by brush, roller or spray. First coat must be thinned 1/1 with water and after drying 1 or 2 coats without thinning. Allow 3 hours between coats. Do not apply when temperature is bellow 10°C or against the hot sun. Drying times are longer in cool/moist conditions.
Notice
Uneven gloss might show on film if applied when high humidity is present, which disappears in time

Clean Up

Clean equipment in warm, soapy water

Precautions Health

Restricted to professional use
Danger

Contains: N-METHYL-2-PYRROLIDONE •May damage the unborn child. •Contains: mixture 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol- 3-one (3:1), 1,2-Benzisothiazol-3 (2H) -one and 2,4,7,9 -Tetramethyldec-5-yne-4,7-diol. May cause an allergic reaction. •Safety data sheet available on request. •Obtain special instructions before use. •Do not handle until all safety precautions have been read and understood •Store locked up. •Keep container tightly closed •Do not get in eyes, on skin, or on clothing •Wear protective gloves:> 8 hours (energy time): Butyl rubber (0.70 mm), Neoprene (0.6 mm). Wear protective clothing. Wear eyes protection or face protection •IF exposed or concerned: Get medical advice. •Dispose of contents and container to appropriate waste site in accordance
with local/regional/national/international regulations. •Avoid release to the environment. •Call a POISON CENTRE or doctor if you feel unwell. •Keep out of reach of children.
TEL. POISON CENTER GR: 210 7793777