Surface Preparation
Surfaces must be clean, dry and free of dirt, oil or grease. Completely remove old or poorly adhering varnish and paint to expose new wood. On tropical wood wash down with nitro thinner to remove resins that may lengthen dry times. It mildew is evident it must be removed by scrubbing with a commercial mildew wash, following manufacturer’s direction and cautions.
For Application By
Stir thoroughly before and during use. Apply without thinning by brush, cloth or by dipping. For greater protection finish by applying 2 coats of colored CS093/094 Acrylic Varnish. Do not apply when temperature is below 10°C or against the hot sun. Drying times are longer in cool/moist condition.
Caution
Do not explose exterior wood only with a preservative or colorless.
Notice
Uneven color might show on film if applied when high humidity is present, which will disappear in time.
Clean Up
Clean equipment in warm, soapy water.