Surface Preparation
Surface to be painted must be clean and free of dirt, dust, grease, wax, loose material or flaking paint, and mildew. Clean hard or previously painted surfaces thoroughly with detergent and water. Rinse well. Dull glossy areas by sanding. Dry sanding, flame cutting and /or welding of the dry paint film will give rise to dust fumes. Wet sanding/flatting should be used wherever possible. • Ensure good ventilation during application and drying. Use suitable respiratory protective equipment.
Note: If mildew is present, remove with a commercial mildew wash, following manufacturer’s directions and cautions. Apply 1 coat of CS 323 THE PERFECT PRIMER BATH & SPA Mildewcide Primer after priming as outlined below
For Application By
Stir thoroughly before and during use. Apply by brush, roller or spray. Thin as 5% with clean water. Do not apply at emperatures below 10oC. Drying times are longer in cool/moist conditions.
Clean up
Clean equipment in warm, soapy water promptly after painting.
Precautions Health
• If medical advice is needed, have product container or label at hand • Keep out of reach of children • Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. • Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl2H-isothiazol-3-one (3:1). May produce an allergic reaction. • Do not get in eyes, on skin, or on clothing • Dispose of contents and container to appropriate waste site or recycled in accordance with local and national regulation. • Avoid release to the environment • Contains a biocidal product with fungicidal properties. Active ingredients: butylcarbamate-3-iodo-2-propynyl (55406-53-6) and 2-octyl-2H-isothiazol-3-one (26530-20-1) to protect the coating (film). Do notempty into drains. The residual water from cleaning of the working equipment must not get into the ground or into surface waters. • Call a POISON CENTER, doctor if you feel unwell. • Safety data sheet available on request.