CONCEPTS 100% Acrylic Paint-Flat Finish – CS 170

CONCEPTS 100% Acrylic Paint-Flat Finish – CS 170

100% acrylic emulsion flat finish with exceptional weather- resistant properties. Dries to a breathable coating that resists blistering. Recommended for masonry surfaces such as plaster, concrete, stucco, and brick, as well as for wood. Ideal for seaside exposure on concrete buildings.

Colors: White and over 3.500 tinted colors are available  

Toxicity: Formulated without lead or mercury

Gloss Level: 0-5 at 60 degree viewing angle.

Packaging: 1 lt, 3 lt, 10 lt

100% acrylic emulsion flat finish with exceptional weather- resistant properties. Dries to a breathable coating that resists blistering. Recommended for masonry surfaces such as plaster, concrete, stucco, and brick, as well as for wood. Ideal for seaside exposure on concrete buildings.

Colors: White and over 3.500 tinted colors are available  

Toxicity: Formulated without lead or mercury

Gloss Level: 0-5 at 60 degree viewing angle.

Packaging: 1 lt, 3 lt, 10 lt

Performance Features

Categories: ,

Surface Preparation

Surface to be painted must be free of all loose material such as flaking and peeling paint, dust, concrete salts and heavy chalk. The surface must be clean with all traces of grease, oil, and dirt removed. Remove loose material by scraping and sanding. Sand glossy surfaces to a dull finish. Apply two coats of CS 170 CONCEPTS 100% Acrylic Paint after priming as outlined below.
New Concrete and Plaster: Prime with CS 182 WALL PLUS Solventborne, Waterproofing Stabilizing Primer or CS 181 WALL PLUS Waterborne, Alkali-Resistant Primer, thinned according to label directions.
Unpainted and Weathered Concrete, Brick: Prime with one coat of CS 192 WALL PLUS Waterborne Micronized Stabilizing Eco Primer or CS 182 WALL PLUS Solventborne, Waterproofing Stabilizing Primer, thinned according to label directions.
Previously Painted Surfaces: Prime with CS 182 WALL PLUS Solventborne, Waterproofing Stabilizing Primer or CS 181 WALL PLUS Waterborne, Alkali-Resistant Primer.
Unpainted Wood: Prime with CS 023 THE PERFECT PRIMER All-Purpose Eco Primer or CS 570 THE PERFECT PRIMER Alkyd Multi-primer & sealer.

For Application By

Stir paint thoroughly before use. Apply by roller, brush, or spray. Thin 5% with clean water. Do not apply at temperatures below 10°C. Drying times are longer under cool/moist conditions.

Clean Up

Clean equipment in warm, soapy water after painting. Do not empty into drains or watercourses. Dispose of empty container responsibly and according to local legislation

Precautions Health

If medical advice is needed, have product container or label at hand• Keep out of reach of children• Do not get in eyes, on skin, or on clothing• Avoid release to the environment•Dispose of contents and container to appropriate waste site or recycled in accordance with local and national regulation•Keep container tightly closed.• Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1).• May produce an allergic reaction.•Call a POISON CENTER, doctor if you feel unwell.• Safety data sheet available on request.

TEL. POISON CENTER GR: 210 7793777