CONCRETE STAIN Solventborne Silicon Acrylic CS 078

CONCRETE STAIN Solventborne Silicon Acrylic CS 078

A solvent based penetrating stain made from siliconized acrylic resin that gives a low sheen finish to porous surfaces. Designed to give long-lasting color retention and weather resistance, its colors offers fast dry and easy application. Use to protect and beautify natural building materials such as porous stones, unfinished marble and “mosaic” and artificial building materials such as brick, roof tiles and concrete. Suitable for poured and pre-cast concrete tennis courts, garage, basement, factory and warehouse floors, patios, carports and driveways. As with all stains, do not use on previously painted or non-porous surfaces. Formulated without lead.

Colors:  Clear. Do not Tint.  

Toxicity :Formulated without lead or mercury 

Gloss Level: Low Sheen

Packaging: 0.75 lt, 2.25 lt

A solvent based penetrating stain made from siliconized acrylic resin that gives a low sheen finish to porous surfaces. Designed to give long-lasting color retention and weather resistance, its colors offers fast dry and easy application. Use to protect and beautify natural building materials such as porous stones, unfinished marble and “mosaic” and artificial building materials such as brick, roof tiles and concrete. Suitable for poured and pre-cast concrete tennis courts, garage, basement, factory and warehouse floors, patios, carports and driveways. As with all stains, do not use on previously painted or non-porous surfaces. Formulated without lead.

Colors:  Clear. Do not Tint.  

Toxicity :Formulated without lead or mercury 

Gloss Level: Low Sheen

Packaging: 0.75 lt, 2.25 lt

Performance Features

Surface Preparation

The surface must be dry and clean with all traces of grease, oil, oily substances, wax, sealers, concrete salts and dirt removed. Smooth-towelled surfaces or non-porous concrete must be etched before applying Concrete Stain (for example: use a 10% muriatic acid solution to etch the concrete, then rinse thoroughly with water and allow to dry completely, at least 24 hours, before applying stain. Follow safety and health directions on the muriatic acid label.)
Apply one coat of CS 078 CONCRETE STAIN, Solventborne Silicon Acrylic on porous surfaces, to give a low sheen finish. A second coat is recommended only when first coat does not produce a low sheen finish. Allow 3 hours between coats.

For Application By

Stir thoroughly before and during use. Apply by brush, roller or spray. Do not apply at temperatures below 10°C. Do not apply over asphalt surfaces. Drying times are longer in cool/moist conditions

Clean Up

Clean brushes and equipment with white spirit

Precautions Health

CAUTION. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. • Contains – Naphtha (petroleum), heavy hydrogenated.•Flammable liquid and vapour.• Causes serious eye irritation.● May cause drowsiness or dizziness.● Harmful to aquatic life with long lasting effects.● Repeated exposure may cause skin dryness or cracking.● Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.● Do not get in eyes, on skin, or on clothing ● Wear protective gloves, protective clothing, eye protection,face protection.● IF INHALED: Remove person to fresh air and keep comfortable for breathing.● Call a POISON CENTER, doctor if you feel unwell.● Keep out of reach of children.● Avoid release to the environment● Dispose of contents and container to appropriate waste site or recycled in accordance with local and national regulation● Keep container tightly closed.● Keep cool.● In case of fire: use carbon dioxide, foam, chemical powder to extinguish. • Safety data sheet available on request.

TEL. POISON CENTER GR: 210 7793777