Surface Preparation
Surface to be painted must be clean, dry and free of grease, dirt, dust, flaking paint and mildew. Dull glossy areas by sanding. Apply two coats of CS 515 Select after priming the surface as outlined below.
New Plaster, Gypsum Board: Prime with a full coat of CS 192 Wall Plus Waterborne Micronized Stabilizing Eco Primer or CS 570 The Perfect Primer, Alkyd Multi Primer & Sealer.
Masonry, Concrete, Bricks: Prime with CS 182 Wall Plus Solventborne Waterproofing Stabilizing Primer or CS 181 Wall Plus Waterborne Alkali-Resistant Primer.
Previously Painted Surfaces: If surface is sound, prime with CS 023 The Perfect Primer, All-purpose Eco Primer. Fill nail holes and cracks and sand when dry. Patched surfaces should be spot-primed with CS 023 The Perfect Primer, All-purpose Eco Primer. If previous coating is old porous lime, apply an overall coat of CS 182 Wall Plus Solventborne primer.
New Wood: Prime surfaces with CS 570 The Perfect Primer, Alkyd Multi Primer & Sealer or CS 023 The Perfect Primer, All-purpose Eco Primer.